Description
AquaSeal EcoSilver Ultra-Matte
This is the finish we reach for when contractor-friendly application meets a clean, ultra-matte look on normal to medium traffic hardwood floors.
AquaSeal EcoSilver Ultra-Matte is a one-component, waterborne hardwood floor finish designed to deliver a true ultra-matte appearance with reliable performance and simplified jobsite workflow. Ready to use straight from the container, it eliminates mixing, pot life concerns, and unnecessary complexity.
EcoSilver Ultra-Matte provides excellent adhesion and abrasion resistance for residential and light commercial floors, while maintaining a soft, natural look that does not plasticize or haze the surface. It is a dependable choice when durability matters but ultra-high commercial wear resistance is not required.
Same-day shipping available • Freeze-protected packaging (seasonal) • Local pickup in Saint Paul, MN
Product highlights
-
True ultra-matte appearance with a natural, modern low sheen
-
One-component, waterborne formula with no mixing or pot life
-
Excellent adhesion and abrasion resistance for its class
-
Three-coat system for dependable film build and balanced durability
-
EC1 low-emission certified and W3+ Giscode compliant
-
Compatible with primers such as Flex Sealer and ExoBloc
Performance and application
-
Sheen: Ultra-matte
-
Application: Roller, brush, or cross-trowelled
Roller only on highly absorbent species such as beech, maple, and ash -
Recommended system: Three uniform coats
-
Drying: Light foot traffic after approximately 3 to 4 hours
One coat per day recommended to avoid swelling pressure -
Full cure: Approximately 5 days
Avoid rugs and heavy care products for 7 days -
Coverage: Approximately 350 to 550 sq ft per gallon
-
Shelf life: Minimum 15 months unopened when stored cool, dry, and frost-protected
Limitations:
Not suitable for recoating prefinished floors or cork.
Contractor notes
EcoSilver Ultra-Matte performs best when expectations are matched to the job. It shines on normal to medium traffic floors where clean aesthetics, easy application, and dependable adhesion are the priority. The biggest mistake is over-spreading. Respect one coat per day and build proper film thickness to avoid uneven cure and delayed dry times. Temperature, humidity, and airflow all matter, so adjust your workflow accordingly.